SANTA CLARA, Calif. - TelAve -- ESPEC North America will exhibit at PCB West 2026 at the Santa Clara Convention Center, booth 518, bringing its semiconductor reliability test portfolio to the largest printed circuit board conference in Silicon Valley. The conference runs September 29 through October 2, with the exhibition floor open one day only on Wednesday, September 30.

As semiconductor manufacturing expands across North America, engineers need test methods that catch failure modes standard functional testing misses. Two are increasingly common on dense boards. Electrochemical migration surfaces in the field rather than on the bench, and solder joint fatigue under thermal cycling produces intermittent failures that are expensive to diagnose after shipment.

ESPEC will show two integrated pairings addressing both.

The AMI electrochemical migration evaluation system monitors for gradual resistance drift and sudden migration events, with detection under 100 microseconds. It supports up to 300 channels with independent module control and testing voltages from 100V standard to 2,500V, complying with IPC-TM-650 (2.6.3.3), AEC-Q200, and ISO/IEC 17025. AMI pairs with ESPEC HAST chambers, which combine high temperature, elevated humidity, and positive pressure to accelerate moisture-related failures. Running them together synchronizes electrical measurement with the environmental conditions producing it, in a single test.

More on TelAve News

• Navigating a Changing Market: How AIX Group Is Responding to a Challenging Year
• 450 Million Revenue Run Rate, Global Telecom Reach and a New Digital Growth Opportunity Take Center Stage: IQSTEL, Inc. (N A S D A Q: IQST)
• Wave Helicopters Takes FLIBS 2026 to New Heights
• Canada's First Data Lakehouse Goes Global in Banking: Nabil Bank Becomes Nepal's First Bank to Implement a True Agentic Lakehouse Platform, DataNature
• Latin GRAMMY-Winning Cuban-American Conductor Dr Yalil Guerra to Lead Pepperdine's Oklahoma!

The AMR conductor resistance evaluation system provides continuous monitoring of solder joint and conductor resistance through thermal cycling, with accuracy of plus or minus 0.5% at 100 mOhm and scaling from 40 to 280 channels. Every unit ships with ISO/IEC 17025-compliant calibration. AMR pairs with the TSE-12 thermal shock chamber, correlating resistance data with temperature transitions as they happen rather than reporting pass or fail at the end of a run.

Both systems are engineered by ESPEC to work with ESPEC chambers. That means synchronized data, simpler setup, and one point of contact for calibration and service.

More on TelAve News

• Highsfield Showcases Earth Zoom Generator for Cinematic AI Videos
• Patton AI Launches Patton Hive 4.5: Wartime Breakthroughs for Drones and Robots When GPS Goes Dark
• Wisdom trumps wrinkles: 66% of Aussie women wouldn't turn back the clock
• Attorney Jason M. Sullivan Quoted in The Telegraph on Trump's $10 Billion BBC Lawsuit
• Sycamore Dove Releases "Loving Every Moment"

ESPEC North America is part of ESPEC Corp., the world's largest company dedicated exclusively to environmental test chambers, with ISO 9001:2015 manufacturing certification. The AMI and AMR line originates from ESPEC's Japanese engineering organization and is now expanding into North American labs.

The PCB West exhibition floor runs a single day and the Printed Circuit Engineering Association reports it often sells out. With more than 2,000 attendees, ESPEC recommends scheduling ahead. Engineers can reserve time with the team before September 30 or call 616-896-6100.

About ESPEC
ESPEC Corp. is the world's largest manufacturer of environmental test chambers. ESPEC North America offers a full range of environmental test chambers and related services across the continent.