EVESHAM, U.K. - TelAve -- Households in England and Wales are set to see water bills rise again from April 2026, with average annual costs increasing by £33 to around £639. With water costing approximately 0.35 pence per litre, everyday usage can quickly add up, meaning many households may be unknowingly overspending through inefficient fixtures.

However, simple DIY changes can make a noticeable difference. Many water-saving solutions are inexpensive, easy to install, and can be fitted without the need for a plumber or specialist tools, helping households reduce both water usage and monthly bills.

1. Swap to a water-efficient shower head
Water-efficient shower heads can reduce usage from around 10–15 litres per minute to as little as 6 litres, saving up to 90 litres during a typical 10-minute shower.

More on TelAve News

• Blue Sparrow Coffee named Best Matcha in Westword's Best of Denver 2026
• Ocean County College Introduces Pathways to Simplify the Student Journey and Strengthen Career Connections
• Kiko Nation Expands to Apple App Store, Achieving Full Mobile Deployment for Livestock Digital Registry Platform
• The Lawyers' Marketer Launches Claude AI Implementation Service for Law Firms
• Certified Trading Card Association and Collectors MD Launch Healthy Hobby Initiative

Over a year, this could save up to 32,000 litres of water per person. At a cost of 0.35p per litre, this equates to around £115 annually on water bills alone, with additional savings from reduced hot water usage.

They are inexpensive, easy to install, and can be fitted in minutes by attaching to an existing shower hose, making them a practical long-term solution for reducing household water consumption.

2. Install tap aerators
Tap aerators reduce water flow by mixing air with the stream, maintaining pressure while lowering overall usage. Some models can cut flow from around 15 litres per minute to as little as 6 litres.

This can save up to 15,000 litres of water per year. Based on a cost of 0.35p per litre, that's around £50 annually, simply by reducing excess water flow during everyday tasks.

They are low cost, widely available, and can be fitted to existing taps in seconds, making them one of the easiest ways to improve water efficiency.

More on TelAve News

• L2 Aviation Earns FAA STC for Thales AVIATOR 200S for Boeing 777
• FinIQ Edu Launches High-Impact Workshop Vertical to Close the Workplace Benefits Gap—Drives 82% Surge in 401(k) Participation Intent
• HousingWire launches Mortgage Rankings, bringing a data-driven benchmark to originator performance
• J&J Exterminating Reminds Residents to prepare for Termite Swarm Season
• Registered Nurse Launches Healthcare Wealth Strategy Practice for Healthcare Professionals

3. Upgrade to a dual-flush toilet
Older toilets with single flush systems can use up to 13 litres of water per flush, significantly more than modern dual-flush alternatives.

Reducing just five flushes per day by six litres could save around 11,000 litres of water per year. At 0.35p per litre, this equates to approximately £38 annually in water costs, with higher savings likely in larger households.

For those confident with DIY, upgrading to a dual-flush system can be a manageable task, with many modern designs created for straightforward installation.

With water charged per litre, even small reductions in daily usage can lead to meaningful savings over time. As bills continue to rise, these small changes can help households better manage costs while using water more efficiently. (https://www.plumbworld.co.uk/blog/how-to-save-water-at-home)